OPBOX 2.1 is a complete ultrasonic testing device, suitable for all ultrasonic measurements and due to many additional digital inputs/outputs and internal processor it can be used as a controller for more complicated devices. Opbox 2.1 can work together with devices like multiplexers or scanners. The box has an implemented one channel pulser & receiver and can be used with one or two transducers (one is sending, and the second one receiving). The system allows to buffer many acquisitions in internal memory and forward a whole packet of data to control application. In this way, the high throughput of data reading from the device is obtained.
PRF up to 10kHz
- Switchable analogue filters (0.5 - 25MHz) - Support fast TGC (time gain compensation) - 2 signal inputs PE and TT - Input attenuator (-20dB) - Input Impedance 50 Ohm, 10pF - 10 bit A/D Converter - 100MHz sampling frequency, 8bit samples - Up to 512k x 16bit samples memory - Delay settings up to 65535 sample periods
- USB 2.0 powered
The product has been tested and found to be in conformity with standards: • ISO 16831:2012 Non-destructive testing -- Ultrasonic testing -- Characterization and verification of ultrasonic thickness measuring equipment • EN 12668-1; EN 12668-1 Non-destructive testing – Characterization a verification of ultrasonic examination equipment. Part 1: Instruments • PN-EN 12668-3:2014-02 Non-destructive testing – Characterization a verification of ultrasonic examination equipment. Part 2: Combined Equipment Specification of the calibration: According to an above specification of International Standards DIN25450 Ultrasonic equipment for manual testing and BN-85/0601-14 Test and Calibration Procedure: OPTEL for OPBOX/OPCARD/OPMUX family
Pulse Voltage 0V to 360V (positive pulse)
With years of export experience along
Charging Time adjustable from 0 to 3.1us in 0.1us steps
High gain up to +89 dB, Low noise preamplifier (0.74 nV/√(Hz))
Optel sp. z o.o. (Ltd) is an innovative company established in 1989. It employs a team of engineers, that is passionately following their goal to create new, innovative products. We specialize in ultrasonic technologies and after decades of gaining experience, we have become renown specialists in this area. For past years, we have been solving with good results technical problems of our customers. Our company is a member of Polish Chamber of Commerce for High Technology and European Association for Biometrics – Human Identity in Europe.
Optel's innovative developments have resulted in the granting of several US and World patents for applications in the field of biometrics. Through its early years, Optel's efforts were focused almost exclusively on their biometric finger-scanning project. However, over the last almost twenty years, Optel worked on a number of other innovative products for non-destructive testing, measurement systems for industrial, laboratory purposes or medical diagnostics, support of technological processes, contact less measurement of vibration, distance, geometry and size and more. Various researches led in our company are on the worldwide level. For past years, Optel has become a trusted and very effective expert in the field of ultrasound and biometrics. With its' professional and very creative contribution in creating new technologies, the company established its' current position as a reliable partner.
We exist continuously since 1989. We have been trusted by hundreds of institutes, companies and natural persons and during a process, most of them become our permanent partner's receivers and user of created products and solutions.
For more information, you are a warm welcome to visit our website: www.ultrasonic.technology
OPCARD 2.2 Ultrasonic Card with Integrated Pulser and Receiver
opMUX Ultrasonic multiplexer
OPLabBox Ultrasonic Pulser & Receiver with Bandpass Amplifier