OPLabBox 2.0 is particularly well suited for ultrasonic measurements. Wide bandwidth amplifier with a switched bandpass filter and integrated pulser makes this device suitable for a variety of ultrasonic applications in the industry as well as in the laboratory.
It is designed to work as a self-sufficient scope adapter, however, it can be used as an expansion box to other signal processing devices. Together with our ultrasonic testing devices (OPCARD or OPBOX) enables to implement a complete ultrasonic system with full hardware and software support.
Power supply: - Supply Voltage: 12V DC (10.5-15V) - Power: Typ 2.5W, max 6W Size (LxWxD): 200x110x43 [mm] 7.9x4.3x1.7 [inch] Analog parameters: -Input channels: 2 (switched): send & receive and receive -Input range: 550mVpp -Input impedance: 50 / 200 ohms -Bandwidth [-3dB]: 40kHz to 25MHz -High Pass Filter [Hz] (switched): 40k, 80k, 160k, 320k, 640k, 1.25M, 2.5M, 5M -Low Pass Filter [Hz] (switched): 200k, 400k, 800k, 1.6M, 3.2M, 6.4M, 12.5M, 25M -Input amplifier gain: 104dB total gain range: -10 to 70dB step 0.1dB, +0 or +24dB switched post amplifier. -Output range: 2.5Vpp -Output impedance: 50 ohms Trigger: Internal or external PRF: max 10kHz Pulser: Step pulser, 0V -360V fluently regulated, <40ns edge falling time Memory: Memory settings up to 10 sets Remote control: USB (virtual RS232 COM) ASCII protocol
OPLabBox is a wide bandwidth (40kHz to 25MHz) low-noise amplifier with a switched bandpass filters and integrated step pulser. The device can be used in classic ultrasonic applications with one or two ultrasonic transducers as well as universal broadband signal amplifier. The new design has a graphical 2-inch LCD display and user-friendly interface. Remote control functionality allows being used in automatic measurements setups.
● Low noise pre-amplifier ● Switchable input impedance ● Separately switchable low- and high-pass filters ● More than 100dB total analogue gain range ● 80dB regulated range with 0.1dB step ● Intuitive user interface with graphics LCD ● Compact size, Various mounting options ● Low power consumption (typical 2.5 W) ● Easy to use ASCII protocol over USB ● Store up to 10 settings sets ● Self-hardware diagnostic
Optel sp. z o.o. (Ltd) is an innovative company established in 1989. It employs a team of engineers, that is passionately following their goal to create new, innovative products. We specialize in ultrasonic technologies and after decades of gaining experience, we have become renown specialists in this area. For past years, we have been solving with good results technical problems of our customers. Our company is a member of Polish Chamber of Commerce for High Technology and European Association for Biometrics – Human Identity in Europe.
Optel's innovative developments have resulted in the granting of several US and World patents for applications in the field of biometrics. Through its early years, Optel's efforts were focused almost exclusively on their biometric finger-scanning project. However, over the last almost twenty years, Optel worked on a number of other innovative products for non-destructive testing, measurement systems for industrial, laboratory purposes or medical diagnostics, support of technological processes, contact less measurement of vibration, distance, geometry and size and more. Various researches led in our company are on the worldwide level. For past years, Optel has become a trusted and very effective expert in the field of ultrasound and biometrics. With its' professional and very creative contribution in creating new technologies, the company established its' current position as a reliable partner.
We exist continuously since 1989. We have been trusted by hundreds of institutes, companies and natural persons and during a process, most of them become our permanent partner's receivers and user of created products and solutions.
For more information, you are a warm welcome to visit our website: www.ultrasonic.technology